Allied Telesis AT-8100 Series - Manual (Page 832)

Chapter 57: RSTP Commands
832
“SPANNING-TREE LINK-TYPE” on
page 845 Port Interface Designates point-to-point ports and
shared ports.
“SPANNING-TREE LOOP-GUARD”
on page 846 Port Interface Enables the BPDU loop-guard feature
on the ports.
“SPANNING-TREE MAX-AGE” on
page 847 Global
Configuration Sets the maximum age parameter,
which defines how long bridge
protocol data units (BPDUs) are
stored by the switch before they are
deleted.
“SPANNING-TREE MODE RSTP” on
page 848 Global
Configuration Designates RSTP as the active
spanning tree protocol on the switch.
“SPANNING-TREE PATH-COST” on
page 849 Port Interface Specifies the costs of the ports to the
root bridge.
“SPANNING-TREE PORTFAST” on
page 850 Port Interface Designates the ports as edge ports.
“SPANNING-TREE PORTFAST
BPDU-GUARD” on page 851 Port Interface Enables the BPDU guard feature on a
port.
“SPANNING-TREE PRIORITY (Bridge
Priority)” on page 852 Global
Configuration Assigns the switch a priority number.
“SPANNING-TREE PRIORITY (Port
Priority)” on page 853 Port Interface Assigns priority values to the ports.
“SPANNING-TREE RSTP ENABLE”
on page 854 Global
Configuration Enables RSTP on the switch.
Table 93. Rapid Spanning Tree Protocol Commands (Continued)
Command Mode Description