Allied Telesis AT-8100 Series - Manual (Page 925)

925
Chapter 61
Port-based and Tagged VLAN
Commands
The VLAN commands are summarized in Table 99 and described in detail
within the chapter.
Table 99. Port-based and Tagged VLAN Commands
Command Mode Description
“NO SWITCHPORT ACCESS VLAN”
on page 926 Port Interface Removes untagged ports from
VLANs.
“NO SWITCHPORT TRUNK” on
page 927 Port Interface Removes the tagged designation from
ports.
“NO SWITCHPORT TRUNK NATIVE
VLAN” on page 928 Port Interface Reestablishes the Default_VLAN as
the native VLAN of tagged ports.
“NO VLAN” on page 929 VLAN
Configuration Deletes VLANs from the switch.
“SHOW VLAN” on page 930 User Exec and
Privileged Exec Displays all the VLANs on the switch.
“SWITCHPORT ACCESS VLAN” on
page 932 Port Interface Adds untagged ports to a VLAN.
“SWITCHPORT MODE ACCESS” on
page 934 Port Interface Designates ports as untagged ports.
“SWITCHPORT MODE TRUNK” on
page 935 Port Interface Designates ports as tagged ports.
“SWITCHPORT TRUNK ALLOWED
VLAN” on page 937 Port Interface Adds and removes tagged ports from
VLANs.
“SWITCHPORT TRUNK NATIVE
VLAN” on page 940 Port Interface Designates native VLANs for tagged
ports.
“VLAN” on page 942 VLAN
Configuration Creates VLANs.