Allied Telesis AT-8100 Series - Manual (Page 1197)

AT-8100 Switch Command Line User’s Guide
1197
SNMP-SERVER HOST
Syntax
snmp-server host ipaddress informs|traps version 3
auth|noauth|priv username
Parameters
ipaddress
Specifies the IP address of a trap receiver. The address can be
IPv4 or IPv6. You can specify just one address.
informs/trap
Specifies the type of message the switch sends. The options are:
informs: Sends inform messages.
traps: Sends trap messages.
noauth/auth/priv
Specifies the minimum security level of the user associated with
this entry. The options are:
noauth: Indicates no authentication or privacy.
auth: Indicates authentication, but no privacy.
priv: Indicates authentication and privacy.
username
Specifies an SNMPv3 user name.
Mode
Global Configuration mode
Description
Use this command to designate network devices to receive SNMPv3
inform and trap messages.