Allied Telesis AT-8100 Series - Manual (Page 93)

93
Chapter 4
Basic Command Line Management
Commands
The basic command line commands are summarized in Table 5.
Table 5. Basic Command Line Commands
Command Mode Description
“? (Question Mark Key)” on page 95 All modes Displays the on-line help.
“CLEAR SCREEN” on page 97 User Exec and
Privileged Exec Clears the screen.
“CONFIGURE TERMINAL” on
page 98 Privileged Exec Moves you from the Privileged Exec
mode to the Global Configuration
mode.
“COPY RUNNING-CONFIG
STARTUP-CONFIG” on page 99 Privileged Exec Updates the active boot configuration
file with the current settings from the
switch.
“DISABLE” on page 100 Privileged Exec Returns you to the User Exec mode
from the Privileged Exec mode.
“DO” on page 101 Global
Configuration Performs Privileged Exec mode
commands from the Global
Configuration mode.
“ENABLE” on page 103 User Exec Moves you from the User Exec mode
to the Privileged Exec mode.
“END” on page 104 All modes
below the
Global
Configuration
mode Returns you to the Privileged Exec
mode.
“EXIT” on page 105 All modes
except the User
Exec and
Privileged Exec Moves you up one mode.
“LENGTH” on page 106 Console Line
and Virtual
Terminal Line Specifies the maximum number of
lines the SHOW commands display at
one time on the screen.
“LOGOUT” on page 108 User Exec Ends a management session.