Allied Telesis AT-8100 Series - Manual (Page 1723)

AT-8100 Switch Command Line User’s Guide
1723
dec-lavc Indicates protocol number 6007. Enter the
parameter name or its number.
dec-mod-dump-id Indicates protocol number 6001. Enter the
parameter name or its number.
dec-mop-rem-cdons Indicates protocol number 6002. Enter the
parameter name or its number.
ecma-internet Indicates protocol number 0803. Enter the
parameter name or its number.
eia-rs protocol Indicates protocol number 4E. Enter the
parameter name or its number.
ethertalk-2 Indicates protocol number 809B. Enter the
parameter name or its number.
ethertalk-2-aarp Indicates protocol number 80F3. Enter the
parameter name or its number.
ibm-sna Indicates protocol number 80D5. Enter the
parameter name or its number.
ip Indicates protocol number 0800. Enter the
parameter name or its number.
ipv6 Indicates protocol number 86DD. Enter the
parameter name or its number.
ipx Indicates protocol number 8137. Enter the
parameter name or its number.
ipx-802dot2 Indicates protocol number E0. Enter the
parameter name or its number.
ipx-802dot3 Indicates protocol number FFFF. Enter the
parameter name or its number.
ipx-snap Indicates protocol number 8137. Enter the
parameter name or its number.
iso-clns-is Indicates protocol number FE. Enter the
parameter name or its number.
nbs-internet Indicates protocol number 0802. Enter the
parameter name or its number.
netbeui Indicates protocol number F0. Enter the
parameter name or its number.
Table 237. Layer Three Protocol (Continued)
Parameter Description