No log permanent – Allied Telesis AT-8100 Series User Manual
Page 702
Chapter 46: Event Log Commands
702
NO LOG PERMANENT
Syntax
no log permanent [level
level
]|[program
program
]|
[msgtext
msgtext
]
Parameters
level
Specifies the severity level setting.
program
Specifies the management software module setting. To specify
more than one module, separate the modules with commas.
msgtext
Specifies a text string setting.
Mode
Global Configuration mode
Description
Use this command to cancel the settings set by the LOG PERMANENT
command. You can cancel a setting individually by specifying a
parameter. If you do not specify any parameters, the command cancels all
the settings and restores the default settings for the permanent log.
Confirmation Command
Example
This example cancels the settings and restores the default settings for the
permanent log:
awplus# no log permanent
This example cancels only the setting of MAC and keeps other settings so
that the switch sends all messages that have a minimum severity level of 4
and that are generated by the IP program:
awplus# show log config