Allied Telesis AT-8100 Series - Manual (Page 1135)

AT-8100 Switch Command Line User’s Guide
1135
SHOW DOT1X
Syntax
show dot1x
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display whether 802.1x port-based network access
control is enabled or disabled on the switch and the IP addresses of the
RADIUS servers. An example is shown in Figure 199.
Figure 199. SHOW DOT1X Command
Example
This example displays the status of the 802.1x port-based network access
control feature and the IP addresses of the RADIUS servers:
awplus# show dot1x
802.1 Port-Based Authentication: Enabled
RADIUS server address (auth): 149.32.146.78