Allied Telesis AT-8100 Series - Manual (Page 1495)

1495
Chapter 97
RADIUS and TACACS+ Client
Commands
The commands for the RADIUS and TACACS+ clients are summarized in
Table 155 and described in detail within the chapter.
Table 155. RADIUS and TACACS+ Client Commands
Command Mode Description
“AAA ACCOUNTING LOGIN” on
page 1497 Global
Configuration Configures RADIUS or TACACS+
accounting for login shell session.
“AAA AUTHENTICATION ENABLE
(TACACS+)” on page 1499 Global
Configuration Enables the TACACS+ password on
the switch.
“AAA AUTHENTICATION LOGIN” on
page 1501 Global
Configuration Enables RADIUS or TACACS+ on the
switch globally.
“IP RADIUS SOURCE-INTERFACE”
on page 1503 Global
Configuration Configures the RADIUS source IP
address interface.
“LOGIN AUTHENTICATION” on
page 1505 Console Line
and Virtual
Terminal Line Activates remote authentication for
local management sessions and
remote Telnet and SSH sessions.
“NO LOGIN AUTHENTICATION” on
page 1507 Console Line
and Virtual
Terminal Line Deactivates remote authentication for
local management sessions and
remote Telnet and SSH sessions.
“NO RADIUS-SERVER HOST” on
page 1508 Global
Configuration Deletes IP addresses of RADIUS
servers from the list of authentication
servers in the RADIUS client.
“NO TACACS-SERVER HOST” on
page 1509 Global
Configuration Deletes IP addresses of TACACS+
servers from the list of authentication
servers in the TACACS+ client.
“RADIUS-SERVER HOST” on
page 1510 Global
Configuration Adds IP addresses of RADIUS
servers to the RADIUS client for
remote authentication and accounting.
“RADIUS-SERVER KEY” on
page 1512 Global
Configuration Specifies the global encryption key of
the RADIUS servers.