Log console – Allied Telesis AT-8100 Series User Manual
Page 696
Chapter 46: Event Log Commands
696
LOG CONSOLE
Syntax
log console [level
level
]|[program
program
]|[msgtext
msgtext
]
Parameters
level
Specifies the minimum severity level of the event messages. The
levels are listed in Table 79 on page 694.
program
Specifies the event messages of a particular management
software module. The modules are listed in Table 81 on page 705.
To specify more than one module, separate the modules with
commas.
msgtext
Specifies a text string with double quotations around to match the
event messages. This string is case sensitive and must be the last
text on the command line.
Mode
Global Configuration mode
Description
Use this command to specify the types of event messages to be sent to
the console. You can filter the messages by specifying severity level,
management software module, a text-string within the message or a
combination of some or all of these.
The available severity levels are listed in Table 79 on page 694, and the
management software modules is in Table 81 on page 705.
Confirmation Command