Allied Telesis AT-8100 Series - Manual (Page 565)

565
Chapter 37
Boot Configuration File Commands
The boot configuration file commands are summarized in Table 58 and
described in detail within the chapter.
Table 58. Boot Configuration File Commands
Command Mode Description
“BOOT CONFIG-FILE” on page 566 Global
Configuration Designates or creates a new active
boot configuration file for the switch.
“COPY RUNNING-CONFIG” on
page 568 Privileged Exec Creates new boot configuration files
that contain the current settings of the
switch.
“COPY RUNNING-CONFIG
STARTUP-CONFIG” on page 569 Privileged Exec Saves the switch’s current
configuration to the active boot
configuration file.
“ERASE STARTUP-CONFIG” on
page 570 Privileged Exec Returns the switch to its default
settings.
“NO BOOT CONFIG-FILE” on
page 571 Global
Configuration Designates the default BOOT.CFG file
as the active boot configuration file on
the switch.
“SHOW BOOT” on page 572 Privileged Exec Displays the names of the active
configuration file and the configuration
file that was used by the switch during
the last reset or power cycle.
“SHOW STARTUP-CONFIG” on
page 574 Privileged Exec Displays the contents of the active
boot configuration file.
“WRITE” on page 575 Privileged Exec Saves the switch’s current
configuration to the active boot
configuration file.