Allied Telesis AT-8100 Series - Manual (Page 1119)

AT-8100 Switch Command Line User’s Guide
1119
DOT1X SUPPLICANT-PARAMS HELD-PERIOD
Syntax
dot1x supplicant-params held-period value
Parameters
value
Specifies the held timeout period in seconds for supplicant ports.
The range is 0 to 65,535 seconds. The default value is 60 seconds.
Mode
Port Interface mode
Description
Specifies the amount of time in seconds a supplicant waits to re-
authenticate after an authentication attempt has failed. A supplicant can
attempt to log on again after the time period has expired.
Confirmation Command
“SHOW RUNNING-CONFIG INTERFACE” on page 245
Example
This example sets the held timeout period on supplicant ports 1.0.7 and
1.0.8 to 90 seconds:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.7,port1.0.8
awplus(config-if)# dot1x supplicant-params held-period 90