Allied Telesis AT-8100 Series - Manual (Page 956)

Chapter 62: GARP VLAN Registration Protocol
956
Disabling GVRP Timers on the Switch
To disable GVRP timer configurations, use the NO GVRP TIMER
commands in the Global Configuration mode. They are:
no gvrp timer join
no gvrp timer leave
no gvrp timer leaveall
Use these commands to reset GVRP timers to the default values for each
individual parameter. The default values are:
GVRP timer join: 20
GVRP timer leave: 60
GVRP timer leave all: 1000
For reference information, refer to “NO GVRP TIMER JOIN” on page 974,
“NO GVRP TIMER LEAVE” on page 975 and “NO GVRP TIMER
LEAVEALL” on page 976.