Allied Telesis AT-8100 Series - Manual (Page 1094)

Chapter 72: 802.1x Port-based Network Access Control Commands
1094
“SHOW DOT1X” on page 1135 Privileged Exec Displays whether 802.1x port-based
network access control is enabled or
disabled on the switch and the IP
address of the RADIUS server.
“SHOW DOT1X INTERFACE” on
page 1136 Privileged Exec Displays the parameter settings of
authenticator ports.
“SHOW DOT1X STATISTICS
INTERFACE” on page 1137 Privileged Exec Displays EAP packet statistics on
authenticator ports.
“SHOW DOT1X SUPPLICANT
INTERFACE” on page 1138 Privileged Exec Displays the supplicant state on
authenticator ports.
Table 115. 802.1x Port-based Network Access Control Commands (Continued)
Command Mode Description