Allied Telesis AT-8100 Series - Manual (Page 1899)

AT-8100 Switch Command Line User’s Guide
1899
SHOW IP RIP COUNTER
Syntax
show ip rip counter
Parameters
None
Mode
User Exec and Privileged Exec modes
Description
Use this command to display counters for RIP packets on the switch.
Figure 290 provides an example of information that the command
displays.
Figure 290. SHOW IP RIP COUNTER Command
The fields are described in Table 260.
Table 260. SHOW IP RIP COUNTER Command
Parameter Description
Input: Indicates that the counters are for
incoming RIP packets.
inResponses Displays the number of response packets
received.
inRequests Displays the number of request packets
received.
IP RIP Counter Summary
Input:
inResponses......................5
inRequests.......................1
inDiscards.......................0
Output:
outResponses.....................6
outRequests......................2
outTrigResponses.................0
outErrors........................0