Allied Telesis AT-8100 Series User Manual

Page 1623

Text mode
Original mode

AT-8100 Switch Command Line User’s Guide

1623

2001:0db8::a2:1c50/64 any
awplus(config-ipv6-acl)# exit
awplus(config)# interface port1.0.9
awplus(config_if)# ipv6 traffic-filter protocopytomirror

This example creates a proto ACL, called “protodeny1,” that copies EGP
packets from source IPv6 address 2001:0db8:AC10:FE01::/64 to IPv6
destination address 2001:0db8:AC10:FE02::/64. Then the ACL is
assigned to port 22:

awplus> enable
awplus# configure terminal
awplus(config)# ipv6 access-list protodeny1
awplus(config-ipv6-acl)# deny proto 8 2001:0db8:AC10:FE01::/
64 2001:0db8:AC10:FE02::/64
awplus(config-ipv6-acl)# exit
awplus(config)# interface port1.0.22
awplus(config_if)# ipv6 traffic-filter protodeny1