Allied Telesis AT-8100 Series - Manual (Page 1501)

AT-8100 Switch Command Line User’s Guide
1501
AAA AUTHENTICATION LOGIN
Syntax
aaa authentication login default [ group radius|tacacs]
[ local ]
Parameters
default
Indicates the default accounting method list.
group
Indicates the user server group. Specify one of the following:
radius: Uses all RADIUS servers.
tacacs: Uses all TACACS+ servers.
local
Indicates that authentication using the password provided in the
ENABLE PASSWORD command is attempted if a RADIUS or
TACACS+ server is not available. For information about this
command, see “ENABLE PASSWORD” on page 1390. This is an
optional parameter.
Mode
Global Configuration mode
Description
Use this command to enable RADIUS or TACACS+ on the switch globally.
This command creates an ordered list of methods used to authenticate a
RADIUS or TACACS+ user login. Specify the local parameter or the group
parameter in the order that you want these parameters to be applied.
Use the no version of this command, NO AAA AUTHENTICATION LOGIN,
to remove the authentication setting on the switch. This command returns
the default method list to its default state which is local.
Note
The NO AAA AUTHENTICATION LOGIN command does not
remove the default method list from the software.