Allied Telesis AT-8100 Series - Manual (Page 1927)

AT-8100 Switch Command Line User’s Guide
1927
802.1x Port-Based Network Access Control
The following table describes the 802.1x Port-based Network Access
Control default settings.
The following table lists the default settings for an authenticator port.
802.1x Port-based Network Access
Control Settings
Default
Port Access Control Disabled
Authentication Method RADIUS EAP
Port Roles None
Authentication Port 1812
Authenticator Port Setting Default
Authentication Mode 802.1x
Supplicant Mode Single
Port Control Auto
Quiet Period 60 seconds
TX Period 30 seconds
Reauth Enabled Enabled
Reauth Period 3600 seconds
Supplicant Timeout 30 seconds
Server Timeout 30 seconds
Max Requests 2
VLAN Assignment Disabled
Control Direction Both
Guest VLAN Disabled