Allied Telesis AT-8100 Series - Manual (Page 679)

AT-8100 Switch Command Line User’s Guide
679
Figure 131. SHOW IP DHCP SNOOPING INTERFACE Command
awplus# show ip dhcp snooping interface port1.0.1-port1.0.6
DHCP Snooping Port Status and Configuration:
Port: Provisioned ports marked with brackets, e.g. (portx.y.z)
Action: LG = Log
TR = Trap
LD = Link down
DHCP Snooping Bindings:
Full Max
Port Status Leases Leases Action Subscriber-ID
---------------------------------------------------------------------------
port1.0.1
Untrusted 1 1 LG -- --
port1.0.2 Untrusted 0 50 LG TR LD Building 1 Level 1
port1.0.3 Untrusted 0 50 LG -- --
port1.0.4 Untrusted 0 50 LG -- -- Building 1 Level 2
port1.0.5 Trusted 0 1 -- -- LD Building 2 Level 1
port1.0.6 Trusted 0 1 LG -- --
Table 76. Parameters in SHOW IP DHCP SNOOPING INTERFACE
Command
Parameter Description
Port Specifies the port interface name.
Status Indicates the port status as either untrusted
(default) or trusted.
Full Leases Indicates the number of entries in the DHCP
snooping database for the port.
Max Leases Indicates the maximum number of entries
that can be stored in the DHCP snooping
database for the port.
Action Specifies the DHCP snooping violation
actions for the port.
Subscriber ID Indicates the subscriber ID for the port. If
the subscriber ID is longer than 34
characters, only the first 34 characters are
displayed.