Allied Telesis AT-8100 Series - Manual (Page 1263)

AT-8100 Switch Command Line User’s Guide
1263
“NO LLDP MED-TLV-SELECT” on
page 1293 Port Interface Stops ports from transmitting specified
LLDP-MED TLVs.
“NO LLDP NOTIFICATIONS” on
page 1295 Port Interface Prevents ports from sending LLDP
SNMP notifications (traps).
“NO LLDP RUN” on page 1296 Global
Configuration Disables LLDP on the switch.
“NO LLDP TLV-SELECT” on
page 1297 Port Interface Stops ports from sending optional
LLDP TLVs to their neighbors.
“NO LLDP TRANSMIT RECEIVE” on
page 1298 Port Interface Stop ports from transmitting and/or
accepting LLDP advertisements.
“NO LOCATION” on page 1299 Port Interface Removes LLDP-MED location
information from the ports on the
switch.
“SHOW LLDP” on page 1301 Privileged Exec Displays general LLDP settings.
“SHOW LLDP INTERFACE” on
page 1303 Privileged Exec Displays the LLDP port settings.
“SHOW LLDP LOCAL-INFO
INTERFACE” on page 1305 Privileged Exec Displays the current configurations of
the LLDP advertisements that the
ports on the switch can transmit to
LLDP-compatible neighbors.
“SHOW LLDP NEIGHBORS DETAIL”
on page 1307 Privileged Exec Displays detailed information the
switch has collected from its LLDP-
compatible neighbors.
“SHOW LLDP NEIGHBORS
INTERFACE” on page 1312 Privileged Exec Displays a summary of the information
gathered by the switch from its LLDP-
compatible neighbors.
“SHOW LLDP STATISTICS” on
page 1314 Privileged Exec Displays the LLDP statistics for the
entire switch.
“SHOW LLDP STATISTICS
INTERFACE” on page 1316 Privileged Exec Displays the LLDP statistics for the
individual ports.
“SHOW LOCATION” on page 1318 Privileged Exec Displays the civic, coordinate, and
ELIN location entries on the switch.
Table 128. LLDP and LLDP-MED Commands (Continued)
Command Mode Description