Allied Telesis AT-8100 Series - Manual (Page 113)

AT-8100 Switch Command Line User’s Guide
113
Displaying the System Environmental Status
The switch monitors the environmental status of the switch and any
attached PSU, XEM, or expansion option. The environmental status
covers information about temperatures, fans, and voltage. To display this
information, go to User Exec or Privileged Exec mode and enter the
command:
awplus# show system environment
Figure 31 shows an example of the information the command displays.
The columns are described in “SHOW SYSTEM ENVIRONMENT” on
page 119.
Figure 31. SHOW SYSTEM ENVIRONMENT Command
Note
Switches that do not contain fan controllers will not display
temperature readings.
Environment Monitoring Status
--------------------------------------------------------
Switch Model: AT-8100S/48POE
--------------------------------------------------------
ID Sensor (Units) Reading
Status
--------------------------------------------------------
0 Temp (Degrees C) 37
Normal
1 Fan 1 (RPM) 3467 Normal
2 PSU 1 On Normal
3 PSU 2 Off Off
--------------------------------------------------------