Allied Telesis AT-8100 Series - Manual (Page 119)

AT-8100 Switch Command Line User’s Guide
119
SHOW SYSTEM ENVIRONMENT
Syntax
show system environment
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the environmental information for the switch.
When the command is entered on the stack master, it displays the
information for all the stack members.
Figure 33 shows an example of the information that the command displays
when the switch is a stand-alone.
Figure 33. SHOW SYSTEM ENVIRONMENT Command
Environment Monitoring Status
--------------------------------------------------------
Switch Model: AT-8100S/48POE
--------------------------------------------------------
ID Sensor (Units) Reading
Status
--------------------------------------------------------
0 Temp (Degrees C) 37
Normal
1 Fan 1 (RPM) 3467 Normal
2 PSU 1 On Normal
3 PSU 2 Off Off
--------------------------------------------------------