Allied Telesis AT-8100 Series - Manual (Page 407)

AT-8100 Switch Command Line User’s Guide
407
Figure 94. SHOW STACK Command on an Active Stack
The table in Figure 94 lists the switches in the stack. The columns in the
table are defined in Table 39.
The Operational status field displays the topology of the stacking ports.
The field displays “Ring topology is broken” for the duplex-chain topology
and “Normal operation” for the duplex-ring topology. For more information,
refer to “Stacking Port Topologies” on page 398.
The master module ID and stack MAC address fields display the ID
number and MAC address of the master switch. The local MAC module ID
and MAC address fields display the same information for the switch from
which you are managing the stack. In most situations, the master and local
fields display the same information because a stack should always be
managed through the master switch.
Stacking summary Information:
ID MACADDRESS SwVer Model Status Role
1 00:00:54:55:56:42 2.2.1.3 AT-8100S/24 Ready Master
2 00:00:54:55:78:11 2.2.1.3 AT-8100S/24C Ready Member
3 00:00:54:55:12:09 2.2.1.3 AT-8100S/24 Ready Member
4 00:00:54:55:56:42 2.2.1.3 AT-8100S/48 Ready Member
Operational status Ring topology is broken
Master Module ID: 1
Stack MAC Address: 00:00:54:55:56:42
Local Module ID: 1
Local MAC Address: 00:00:54:55:56:42
Table 39. SHOW STACK Command
Column Definition
ID The stack ID number of the switch.
MAC Address The MAC address of the switch.
SwVer The version number of the management
software.
Model The model name of the switch.
Status The current status of the switch.
Role The stacking role of the switch, which can be
master or member.