beautypg.com

Ip dhcp-relay – Allied Telesis AT-8100 Series User Manual

Page 495

background image

AT-8100 Switch Command Line User’s Guide

495

IP DHCP-RELAY

Syntax

ip dhcp-relay

Parameters

None

Mode

VLAN Configuration mode

Description

Use this command to activate the DHCP relay agent on VLANs so that
they forward DHCP requests. The VLANs must be assigned IP addresses.

Confirmation Command

“SHOW IP DHCP-RELAY” on page 509

Examples

This example activates the DHCP relay agent on the Default VLAN, which
has the VID 1:

awplus> enable
awplus# configure terminal
awplus(config)# interface vlan1
awplus(config-if)# ip dhcp-relay

This example activates DHCP relay on a VLAN with the VID 12:

awplus> enable
awplus# configure terminal
awplus(config)# interface vlan12
awplus(config-if)# ip dhcp-relay

See also other documents in the category Allied Telesis Computer hardware: