beautypg.com

Lldp med-tlv-select, Lldp med-tlv-select 2 – Allied Telesis AT-8100 Series User Manual

Page 1272

background image

Chapter 79: LLDP and LLDP-MED Commands

1272

LLDP MED-TLV-SELECT

Syntax

lldp med-tlv-select capabilities|network-
policy|location|power-management-ext|inventory-
management|all

Parameters

capabilities

Specifies the capabilities TLV.

network-policy

Specifies the network policy TLV.

location

Specifies the location identification TLV.

power-management-ext

Specifies the extended power-via-MDI TLV.

inventory-management

Specifies the inventory management TLV.

all

Configures a port to send all LLDP-MED TLVs.

Mode

Port Interface mode

Description

Use this command to specify the LLDP-MED TLVs the ports are to
transmit to their neighbors. The default setting is for the ports to send all
the LLDP-MED TLVs, except for the inventory TLV. You can specify only
one TLV per command. To remove LLDP-MED TLVs from the ports, refer
to “NO LLDP MED-TLV-SELECT” on page 1293.

Confirmation Command

“SHOW LLDP INTERFACE” on page 1303