Allied Telesis AT-8100 Series - Manual (Page 243)

AT-8100 Switch Command Line User’s Guide
243
MulticastPkts Number of received and transmitted
multicast packets.
BroadcastPkts Number of received and transmitted
broadcast packets
PauseMACCtrlFrms Number of received and transmitted flow
control pause packets.
OversizePkts Number of received packets that
exceeded the maximum size as specified
by IEEE 802.3 (1518 bytes including the
CRC).
Fragments Number of undersized frames, frames
with alignment errors, and frames with
frame check sequence (FCS) errors (CRC
errors).
Jabbers Number of occurrences of corrupted data
or useless signals the port has
encountered.
UnsupportOpcode Number of MAC Control frames with
unsupported opcode.
UndersizePkts Number of frames that were less than the
minimum length as specified in the IEEE
802.3 standard (64 bytes including the
CRC).
SingleCollsnFrm Number of frames that were transmitted
after at least one collision.
MultCollsnFrm Number of frames that were transmitted
after more than one collision.
LateCollisions Number of late collisions.
ExcessivCollsns Number of excessive collisions.
Collisions Total number of collisions on the port.
Layer 3 Counters
ifInUcastPkts Number of ingress unicast packets.
ifOutUcastPkts Number of egress unicast packets.
ifInDiscards Number of ingress packets that were
discarded.
Table 16. SHOW PLATFORM TABLE PORT COUNTERS Command
Parameter Description