Allied Telesis AT-8100 Series - Manual (Page 1697)

1697
Chapter 101
QoS Commands
The Quality of Service (QoS) commands are summarized in Table 233
and described in detail in this chapter.
Table 233. Quality of Service Commands
Command Mode Description
“AUTO-QOS” on page 1701 Interface
Configuration Enables Auto-QoS support for a voice
VLAN and specifies CoS or DSCP
trusted traffic.
“AUTO-QOS-MED” on page 1703 Global
Configuration Enables Auto-QoS-MED support for a
voice VLAN and specifies CoS or
DSCP trusted traffic.
“CLASS” on page 1705 Policy Map
Configuration Associates an existing class map to a
policy map and enters the Policy Map
Class Configuration mode.
“CLASS-MAP” on page 1707 Global
Configuration Creates a class map and enters the
Configuration Class Map mode.
“DEFAULT-ACTION” on page 1708 Policy Map Sets the action for the default class
map belonging to a particular policy
map.
“DESCRIPTION (Policy Map)” on
page 1710 Policy Map Adds a description of the policy map.
“MATCH ACCESS-GROUP” on
page 1712 Class Map Defines a group name as a match
criterion for a class map.
“MATCH COS” on page 1715 Class Map Sets the Class of Service (CoS) for a
class map to match with.
“MATCH DSCP” on page 1717 Class Map Defines DSCP to match incoming
packets.
“MATCH IP-PRECEDENCE” on
page 1718 Class Map Identifies IP precedence values as
match criteria.
“MATCH MAC-TYPE” on page 1719 Class Map Sets the MAC type for a class map.
“MATCH PROTOCOL” on page 1721 Class Map Sets the Ethernet format and protocol
for a class map.