Allied Telesis AT-8100 Series - Manual (Page 769)

AT-8100 Switch Command Line User’s Guide
769
SHOW ETHERCHANNEL SUMMARY
Syntax
show etherchannel summary
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the states of the member ports of the
aggregators. Figure 146 illustrates the information.
Figure 146. SHOW ETHERCHANNEL SUMMARY Command
Example
This example displays the states of the aggregator’s member ports:
awplus# show etherchannel summary
Aggregator #2 .... po2
Admin Key: 0xff01 - Oper Key: 0x0101
Link: Port1.0.2 sync
Link: Port1.0.3 sync
Link: Port1.0.4 sync
Link: Port1.0.5 sync
Link: Port1.0.6 sync
Aggregator #21 .... po21
Admin Key: 0xff16 - Oper Key: 0x1616
Link: Port1.0.21 disabled
Link: Port1.0.22 disabled
Link: Port1.0.23 disabled
Link: Port1.0.24 disabled
Link: Port1.0.25 disabled