beautypg.com

Deleting aggregators – Allied Telesis AT-8100 Series User Manual

Page 755

background image

AT-8100 Switch Command Line User’s Guide

755

Deleting Aggregators

To delete an aggregator, remove all its ports with the NO CHANNEL-
GROUP command, in the Port Interface mode.

Caution

Do not delete an aggregator without first disconnecting the network
cables from its ports. Leaving the network cables connected may
result in a network loop, which can cause a broadcast storm.

These commands delete an aggregator consisting of ports 17, 22 and 23:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.17,port1.0.22,port1.0.23
awplus(config-if)# no channel-group