Allied Telesis AT-8100 Series - Manual (Page 1103)

AT-8100 Switch Command Line User’s Guide
1103
AUTH TIMEOUT REAUTH-PERIOD
Syntax
auth timeout reauth-period value
Parameters
reauth-period
Specifies the time interval that an authenticator port requires a
supplicant to reauthenticate. The range is 1 to 65,535 seconds.
The default value is 3600 seconds.
Mode
Port Interface mode
Description
Use this command to specify the time interval for reauthentication of
supplicants on an authenticator port. Reauthentication must be enabled on
an authenticator port for the timer to work. Reauthentication on a port is
activated with “AUTH REAUTHENTICATION” on page 1101.
Confirmation Command
“SHOW AUTH-MAC INTERFACE” on page 1131 or “SHOW DOT1X
INTERFACE” on page 1136
Example
This example activates reauthentication on port 1.0.16 and sets the
reauthentication interval to 12 hours:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.16
awplus(config-if)# auth reauthentication
awplus(config-if)# auth timeout reauth-period 43200