Absolute start – Allied Telesis AT-8100 Series User Manual
Page 1564
Chapter 99: ACL Commands
1564
ABSOLUTE START
Syntax
absolute
start
Parameters
start
Specifies the time and date that the associated permit or deny
statement goes into effect. Time is expressed in a 24-hour clock
and specified in hours, minutes, and seconds as 00:00:00 with a
colon separating each entry. The date is expressed in month, day,
and year in the 00 00 0000 format with a space separating each
entry.
end
Specifies the time and date that the permit and deny statement
terminates. Time is expressed in a 24-hour clock and specified in
hours:minutes:seconds as 00:00:00 with a colon separating each
entry. The date is expressed in month, day, and year in the 00 00
0000 format with a space separating each entry.
Mode
Configuration Time-Range mode
Description
Use this command to set the time and date that an associated permit or
deny statement goes into effect and then the time and date it terminates.
For example, 8 am is expressed as 8:00:00 and 8 pm as 20:00:00. The
minimum start time is 00:00:01. An example of the date in the day, month,
and year format is 23 07 2012 which represents July 23, 2012.
If no start time and date are specified, the permit or deny statement is
effective immediately.
Note
This command does not have a “NO” version.
Confirmation Command