Allied Telesis AT-8100 Series - Manual (Page 1739)

AT-8100 Switch Command Line User’s Guide
1739
Confirmation Command
“SHOW MLS QOS MAPS COS-QUEUE” on page 1775
Examples
The following example sets an egress CoS queue on port 13, mapping
priority 6 to queue 7:
awplus> enable
awplus# configure terminal
awplus(config)# mls qos enable
awplus(config)# class-map trustcos
awplus(config-cmap)# exit
awplus(config)# policy-map pmap1
awplus(config-pmap)# class trustcos
awplus(config-pmap)# exit
awplus(config)# interface port1.0.13
awplus(config-if)# service-policy input pmap1
awplus(config-if)# exit
awplus(config)# mls qos map cos-queue 6 to 7
This example restores the default mappings of the CoS priorities to the
egress queues on port 4:
awplus> enable
awplus# configure terminal
awplus(config-if)# no mls qos map cos-queue