Allied Telesis AT-8100 Series - Manual (Page 638)

Chapter 43: IGMP Snooping Querier Commands
638
Example
This example displays the status of IGMP snooping querier on the Default
VLAN, which has the ID number 1:
awplus> enable
awplus# show ip igmp interface vlan1
IGMP Snooping The status of IGMP snooping on the switch. The
commands for enabling and disabling this feature
are “IP IGMP SNOOPING” on page 613 and “NO
IP IGMP SNOOPING” on page 618.
IGMP snooping
querier The status of IGMP snooping querier in the
VLAN. The commands for enabling and disabling
the feature are “IP IGMP SNOOPING QUERIER”
on page 635 and “NO IP IGMP SNOOPING
QUERIER” on page 636, respectively.
Table 70. SHOW IP IGMP INTERFACE Command (Continued)
Field Definition