Allied Telesis AT-8100 Series - Manual (Page 590)

Chapter 39: File Transfer Commands
590
COPY FILENAME ZMODEM
Syntax:
copy filename .cfg zmodem
Parameters
filename
Specifies the filename of a configuration file to upload from the file
system in the switch. The filename cannot contain spaces and
include the extension “.cfg”. You can specify one filename.
Mode
Privileged Exec mode
Description
Use this command together with a Zmodem utility to upload boot
configuration files from the file system in the switch to your terminal or
computer. This command must be performed from a local management
session. For instructions on how to use this command, refer to “Uploading
Files from the Switch with Zmodem” on page 584.
Example
This example uploads the configuration file “eng_sw.cfg” from the file
system in the switch:
awplus> enable
awplus# copy eng_sw.cfg zmodem
This message is displayed:
Waiting to send ...
Use your Zmodem utility to transfer the file to your terminal or computer.
The upload method must be Zmodem.