beautypg.com

Lldp holdtime-multiplier, Lldp holdtime-multiplier 6 – Allied Telesis AT-8100 Series User Manual

Page 1266

background image

Chapter 79: LLDP and LLDP-MED Commands

1266

LLDP HOLDTIME-MULTIPLIER

Syntax

lldp holdtime-multiplier

holdtime-multiplier

Parameters

holdtime-multiplier

Specifies the holdtime multiplier value. The range is 2 to 10.

Mode

Global Configuration mode

Description

Use this command to set the holdtime multiplier value. The transmit
interval is multiplied by the holdtime multiplier to give the Time To Live
(TTL) the switch advertises to the neighbors. The transmit interval is set
with “LLDP TIMER” on page 1279.

Confirmation Command

“SHOW LLDP” on page 1301.

Example

This example sets the holdtime multiplier to 7:

awplus> enable
awplus# configure terminal
awplus(config)# lldp holdtime-multiplier 7