Allied Telesis AT-8100 Series - Manual (Page 1799)

1799
Chapter 103
QSP Commands
The QoS Storm Control Protection commands are summarized in
Table 249 and described in detail in this chapter.
Table 249. Quality of Service Commands
Command Mode Description
“SHOW MLS QOS INTERFACE
STORM-STATUS” on page 1800 Privileged Exec Displays the storm status for the
specified port.
“STORM-ACTION” on page 1802 Policy Map
Class Sets the action to take when triggered
by QoS Storm Protection (QSP).
“STORM-DOWNTIME” on page 1804 Policy Map
Class Sets the number of seconds before
the port is re-enabled.
“STORM-PROTECTION” on
page 1805 Policy Map
Class Enables the policy-based QoS Storm
Protection feature.
“STORM-RATE” on page 1806 Policy Map
Class Sets the data rate criteria for triggering
the storm action.
“STORM-WINDOW” on page 1808 Policy Map
Class Sets the frequency that data is
sampled.