beautypg.com

Displaying routing information with rip, Displaying routing information with rip 2, Show ip rip command 0 – Allied Telesis AT-8100 Series User Manual

Page 1862

background image

Chapter 106: Routing Information Protocol (RIP)

1862

Displaying Routing Information with RIP

To confirm that routes are dynamically added by RIP, use the SHOW IP
RIP command.

S1# show ip rip

Figure 288 is an example of the information the command displays.

Figure 288. SHOW IP RIP Command

The columns in Figure 288 are defined in Table 259 on page 1898.

Codes: R - RIP, Rc - RIP connected, Rs - RIP static

C - Connected, S - Static

Network Next hop Metric From If Time

Rc 10.10.10.0/24 1 vlan10

Rc 10.10.50.0/24 1 vlan50

C 192.168.99.0/24 1 vlan1

R 192.168.20.0/24 10.10.10.32 10.10.10.3 vlan10 00:00:19

The R indicates that this network entry is added through RIP.

See also other documents in the category Allied Telesis Computer hardware: