beautypg.com

Lldp timer, Lldp timer 9 – Allied Telesis AT-8100 Series User Manual

Page 1279

background image

AT-8100 Switch Command Line User’s Guide

1279

LLDP TIMER

Syntax

lldp timer

interval

Parameters

interval

Specifies the transmit interval. The range is 5 to 32768 seconds.

Mode

Global Configuration mode

Description

Use this command to set the transmit interval. This is the interval between
regular transmissions of LLDP advertisements. The transmit interval must
be at least four times the transmission delay timer, set with “LLDP TX-
DELAY” on page 1284.

Confirmation Command

“SHOW LLDP” on page 1301

Example

This example sets the transmit interval to 60 seconds:

awplus> enable
awplus# configure terminal
awplus(config)# lldp timer 60