Allied Telesis AT-8100 Series - Manual (Page 1562)

Chapter 99: ACL Commands
1562
“IP ACCESS-LIST (IP)” on page 1597 IP ACL Defines an ACL that filters IP packets
based on source and destination IP
addresses.
“IP ACCESS-LIST (MAC)” on
page 1600 IP ACL Defines an ACL that filters packets
based on source and destination MAC
addresses.
“IP ACCESS-LIST (PROTO)” on
page 1603 IP ACL Defines an ACL that filters traffic flows
based on protocol numbers and
source and destination IP addresses.
“IP ACCESS-LIST (TCP)” on
page 1606 IP ACL Defines an ACL that filters TCP
packets based on source and
destination IP addresses.
“IP ACCESS-LIST (UDP)” on
page 1610 IP ACL Defines an ACL that filters UDP
packets based on source and
destination IP addresses.
“IPV6 ACCESS-LIST” on page 1614 Global
Configuration Creates an IPv6 ACL and enters the
Configuration IPv6 ACL mode.
“IPV6 ACCESS-LIST (ICMP)” on
page 1615 IPv6 ACL Defines an ACL that filters packets
based on ICMP type and source and
destination IPv6 addresses.
“IPV6 ACCESS-LIST (IP)” on
page 1618 IPv6 ACL Defines an ACL that filters traffic flows
based on the IPv6 source and
destination addresses of the packets.
“IPV6 ACCESS-LIST (PROTO)” on
page 1621 IPv6 ACL Defines an ACL that filters traffic flows
based on protocol numbers and
source and IPv6 destination
addresses.
“IPV6 ACCESS-LIST (TCP)” on
page 1624 IPv6 ACL Defines an ACL that filters packets
based on TCP type and source and
destination IPv6 addresses.
“IPV6 ACCESS-LIST (UDP)” on
page 1628 IPv6 ACL Defines an ACL that filters packets
based on UDP type and source and
destination IPv6 addresses.
“IPV6 TRAFFIC-FILTER” on
page 1632 Port Interface Assigns an IPv6 ACL to an interface.
“MAC ACCESS-GROUP” on
page 1633 Global
Configuration Adds MAC address ACLs to ports on
the switch.
Table 190. Access Control List Commands (Continued)
Command Mode Description