Allied Telesis AT-8100 Series - Manual (Page 1138)

Chapter 72: 802.1x Port-based Network Access Control Commands
1138
SHOW DOT1X SUPPLICANT INTERFACE
Syntax
show dot1x supplicant interface port [brief]
Parameters
port
Specifies a port. You can enter more than one port.
[brief]
Displays an abbreviated form of this window. This is an optional
parameter.
Mode
Privileged Exec mode
Description
Use this command to display the supplicant state of the authentication
mode set for the interface on authenticator ports. This command is
equivalent to “SHOW AUTH-MAC SUPPLICANT INTERFACE Command”
on page 1134. An example is shown in Figure 202.
Figure 202. SHOW DOT1X SUPPLICANT INTERFACE Command
Interface port1.0.3
authenticationMethod: dot1x
totalSupplicantNum: 2
authorizedSupplicantNum: 2
macBasedAuthenticationSupplicantNum: 0
dot1xAuthenticationSupplicantNum: 2
otherAuthenticationSupplicantNum: 0
Supplicant name: user2
Supplicant address: 680A.7583.0000
authenticationMethod: dot1x
portStatus: Authorized - currentId: 2
abort:F fail:F start:F timeout:F success:T
PAE: state: Authenticated - portMode: Auto
PAE: reAuthCount: 0
PAE: quietPeriod: 0 - maxReauthReq: 2
BE: state: Idle - reqCount: 0
CD: adminControlledDirections: both