beautypg.com

No snmp-server, No snmp-server 1 – Allied Telesis AT-8100 Series User Manual

Page 1181

background image

AT-8100 Switch Command Line User’s Guide

1181

NO SNMP-SERVER

Syntax

no snmp-server

Parameters

None

Mode

Global Configuration mode

Description

Use this command to disable SNMPv1, SNMPv2c, and SNMPv3 on the
switch. The switch does not permit remote management from SNMP
applications when SNMP is disabled. It also does not send SNMP trap or
inform messages.

Confirmation Command

“SHOW SNMP-SERVER” on page 1188.

Example

This example disables SNMPv1, SNMPv2c, or SNMPv3 on the switch:

awplus> enable
awplus# configure terminal
awplus(config)# no snmp-server