Allied Telesis AT-8100 Series User Manual
Page 61
AT-8100 Switch Command Line User’s Guide
61
Console Line mode
awplus (config-line)#
Sets the session timer for local
management sessions.
Activates and deactivates remote
manager authentication.
Virtual Terminal Line mode
awplus (config-line)#
Sets the session timers for remote
Telnet and SSH management
sessions.
Activates and deactivates remote
manager authentication.
Policy Map mode
awplus (config-pmap)#
Maps flow groups to traffic classes
for Quality of Service policies.
Interface mode
awplus (config-if)#
Configures port settings.
Disables and enables ports.
Configures the port mirror.
Configures 802.1x port-based
network access control.
Creates static port trunks.
Sets the load distribution method for
static port trunks.
Adds and removes ports from
VLANs.
Creates Quality of Service policies.
VLAN Configuration mode
awplus (config-vlan)#
Creates VLANs.
Class mode
awplus (config-pmap-c)#
Configures traffic classes for Quality
of Service policies.
Civic Location mode
awplus (config_civic)#
Creates optional LLDP-MED civic
location entries.
Coordinate Location mode
awplus (config_coord)#
Creates optional LLDP-MED
coordinate location entries.
Router Configuration mode
awplus (config-router)#
Configures RIP.
Table 2. AlliedWare Plus Modes (Continued)
Mode
Prompt
Function