Allied Telesis AT-8100 Series - Manual (Page 1213)

AT-8100 Switch Command Line User’s Guide
1213
Displaying the sFlow Agent
To view the IP addresses and UDP port settings of the collectors as
defined in the sFlow agent on the switch, use the SHOW SFLOW
command in the Global Configuration mode. Here is the command:
awplus(config)# show sflow
Here is an example of the display.
Figure 211. SHOW SFLOW Command
The fields are described in Table 121 on page 1227.
Number of Collectors: 1
Collector_address
UDP_port
================== ========
149.122.78.12 6343
Number of Samplers/Pollers 4
Port
Sample-rate Polling-interval
==== =========== ================
1.0.4 1000 60
1.0.12 1000 60
1.0.13 50000 2400
1.0.14 50000 2400
sFlow Status
============
Enabled