beautypg.com

Power-inline allow-legacy – Allied Telesis AT-8100 Series User Manual

Page 280

background image

Chapter 12: Power Over Ethernet Commands

280

POWER-INLINE ALLOW-LEGACY

Syntax

power-inline allow-legacy

Parameters

None

Mode

Port Interface mode

Description

Use this command to configure the ports to support legacy PDs. Legacy
PDs are PoE devices that were designed before the IEEE 802.3af and
IEEE 802.3at PoE standards were finalized. The default setting is no
support for legacy PDs.

Confirmation Commands

“SHOW POWER-INLINE INTERFACE DETAIL” on page 294

Example

This example configures ports 1 to 6 to support legacy PDs:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.1-port1.0.6
awplus(config-if)# power-inline allow-legacy