Snmp-server, Snmp-server 3 – Allied Telesis AT-8100 Series User Manual

Page 1193

Text mode
Original mode

AT-8100 Switch Command Line User’s Guide

1193

SNMP-SERVER

Syntax

snmp-server

Parameters

None

Mode

Global Configuration mode

Description

Use this command to activate SNMPv1, SNMPv2c, and SNMPv3 on the
switch. The switch permits remote management from SNMP applications
when SNMP is enabled. The switch also sends SNMP messages to trap
and inform receivers.

Confirmation Command

“SHOW SNMP-SERVER” on page 1188

Example

The following example activates SNMPv1, SNMPv2c, and SNMPv3 on the
switch:

awplus> enable
awplus# configure terminal
awplus(config)# snmp-server