Allied Telesis AT-8100 Series - Manual (Page 345)

345
Chapter 16
SNTP Client Commands
The SNTP commands are summarized in Table 33.
Table 33. Simple Network Time Protocol Commands
Command Mode Description
“CLOCK SUMMER-TIME” on
page 346 Global
Configuration Activates Daylight Savings Time on
the SNTP client.
“CLOCK TIMEZONE” on page 347 Global
Configuration Sets the UTC offset value, the time
difference in hours and minutes
between local time and Coordinated
Universal Time (UTC).
“NO CLOCK SUMMER-TIME” on
page 348 Global
Configuration Deactivates Daylight Savings Time
and enables Standard Time.
“NO NTP PEER” on page 349 Global
Configuration Disables the NTP client.
“NTP PEER” on page 350 Global
Configuration Specifies the IP address of the NTP or
SNTP server from which the switch is
to obtain the date and time.
“PURGE NTP” on page 351 Global
Configuration Restores the default settings to the
SNTP client.
“SHOW CLOCK” on page 352 User Exec and
Privilege Exec Displays the date and time.
“SHOW NTP ASSOCIATIONS” on
page 353 Privilege Exec Displays the settings of the NTP client
on the switch.
“SHOW NTP STATUS” on page 355 Privilege Exec Displays whether the switch has
synchronized its time with the
specified NTP or SNTP server.