Allied Telesis AT-8100 Series - Manual (Page 1866)

Chapter 107: Routing Information Protocol (RIP) Commands
1866
“NO AUTO-SUMMARY” on page 1881 Routing
Configuration Disables automatic route
summarization.
“NO DEFAULT-INFORMATION
ORIGINATE” on page 1882 Routing
Configuration Stops the switch from sending the
default route.
“NO IP RIP AUTHENTICATION
MODE” on page 1883 VLAN Interface Restores the default value of plain-text
authentication mode.
“NO IP RIP AUTHENTICATION
STRING” on page 1884 VLAN Interface Deletes the specified authentication
key or password.
“NO IP RIP RECEIVE-PACKET” on
page 1885 VLAN Interface Disables the VLAN interface to
receive routing updates.
“NO IP RIP RECEIVE VERSION” on
page 1886 VLAN Interface Deletes the version of the routing
updates that the routing interface
accepts.
“NO IP RIP SEND-PACKET” on
page 1887 VLAN Interface Disables the VLAN to send routing
updates.
“NO IP RIP SEND VERSION” on
page 1888 VLAN Interface Deletes the version of the routing
updates that the routing interface
sends out.
“NO IP RIP SPLIT-HORIZON” on
page 1889 VLAN Interface Disables split horizon or split horizon
with poison reverse.
“NO NETWORK” on page 1890 Routing
Configuration Stops the specified network or VLAN
from sending and accepting routing
updates.
“NO PASSIVE-INTERFACE” on
page 1891 Routing
Configuration Allows the switch to send route
updates from the specified VLAN
interface.
“NO ROUTER RIP” on page 1892 Global
Configuration Stops the RIP process and erases all
existing RIP configurations on the
switch.
“NO TIMERS BASIC” on page 1893 Routing
Configuration Resets update, timeout, and garbage
timers to the default values.
“NO VERSION” on page 1894 Routing
Configuration Resets the RIP version to the default
value of Version 2.
“PASSIVE-INTERFACE” on
page 1895 Routing
Configuration Prevents the transmission of routing
updates through the routing interface
in the specified VLAN.
Table 258. RIP Commands (Continued)
Command Mode Description