Allied Telesis AT-8100 Series - Manual (Page 1679)

AT-8100 Switch Command Line User’s Guide
1679
awplus (config)# mls qos map cos-queue 0
to 1 Maps CoS priority 0 to egress queue 1.
awplus (config)# mls qos map cos-queue 1
to 1 Maps CoS priority 1 to egress queue 1.
awplus (config)# mls qos map cos-queue 2
to 1 Maps CoS priority 2 to egress queue 1.
awplus (config)# mls qos map cos-queue 4
to 1 Maps CoS priority 4 to egress queue 1.
awplus (config)# mls qos map cos-queue 3
to 5 Maps CoS priority 3 to egress queue 5.
awplus (config)# mls qos map cos-queue 6
to 5 Maps CoS priority 6 to egress queue 5.
awplus (config)# mls qos map cos-queue 7
to 5 Maps CoS priority 7 to egress queue 5.
awplus (config)# mls qos map cos-queue 5
to 7 Maps CoS priority 5 to egress queue 7.
awplus (config-if)# wrr-queue weight
3,3,1,1,2,0,0,0 Assigns a weight to the eight default CoS
queues where weight specifies the number
of packets a port transmits from a queue
before going to the next queue. By default,
the CoS queues start with queue 0. CoS
queues 0 and 1 are assigned a weight of 3.
CoS queues 2 and 3 are assigned a weight
of 1. CoS queue 4 is assigned a weight of 2.
CoS queues 5 through 7 are assigned a
weight of 0.
awplus (config-if)# service-policy input
AutoQos Associates policy map “AutoQoS” to the
given port number.
awplus (config-if)# switchport voice vlan
100 Sets given port number as a tagged member
of voice VLAN 100.
Table 224. Auto-QoS Functionality and Voice VLAN Support Example (Continued)
Command Description