beautypg.com

No switchport trunk – Allied Telesis AT-8100 Series User Manual

Page 927

background image

AT-8100 Switch Command Line User’s Guide

927

NO SWITCHPORT TRUNK

Syntax

no switchport trunk

Parameters

None

Mode

Port Interface mode

Description

Use this command to remove the trunk mode from ports. Ports cannot be
assigned as tagged ports to VLANs once the trunk mode has been
removed.

Note

You must first remove a port from all tagged VLAN assignments
before you can remove its tagged designation. For instructions, refer
to “SWITCHPORT TRUNK ALLOWED VLAN” on page 937.

Confirmation Command

“SHOW RUNNING-CONFIG” on page 170

Example

This example removes the trunk mode from ports 23 and 24:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.23-port1.0.24
awplus(config-if)# no switchport trunk