Allied Telesis AT-8100 Series - Manual (Page 271)

AT-8100 Switch Command Line User’s Guide
271
CLEAR POWER-INLINE COUNTERS INTERFACE
Syntax
clear power-inline counters interface [ port ]
Parameter
port
Specifies a port. You can specify more than one port and clear
event counters for multiple ports.
Mode
Privileged Exec mode
Description
Use this command to clear the PoE port event counters. To clear all of the
port counters, do not enter a port number.
Confirmation Command
“SHOW POWER-INLINE COUNTERS INTERFACE” on page 291
Examples
This example clears all of the PoE port event counters:
awplus# clear power-inline counters interface
This example clears the event counters on ports 4 to 6:
awplus# clear power-inline counters interface port1.0.4-
port1.0.6