Removing ports from the authenticator role, Removing ports from the authenticator role 3 – Allied Telesis AT-8100 Series User Manual

Page 1083

Text mode
Original mode

AT-8100 Switch Command Line User’s Guide

1083

Removing Ports from the Authenticator Role

To remove ports from the authenticator role so that they forward traffic
without authenticating supplicants, go to the Port Interface mode of the
ports and enter the NO DOT1X PORT-CONTROL command. This
example removes the authenticator role from ports 1.0.1 to 1.0.4 and
1.0.18:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.1-port1.0.4,port1.0.18
awplus(config-if)# no dot1x port-control